HTCA-E400 User Manual
34
4. Align the GPU module to the PCIe sockets.
Slide the GPU module into PCIe sockets
until fully seated.
5. Next, we will mount the PCIe bracket with
the installed GPU module back in the
Compute Sled. Make sure to “lock” the
trap door on the Compute Sled, near the
end side of the GPU.
6. Secure the PCIe bracket to the system with
four (4) screws.
7. Insert the GPU power cable to the side of
the GPU module. Other end of power
cable should have been pre-installed on
the motherboard.
8. The GPU module installation has been
completed.
PCIe
S
ock
et
Locked
Open
