NCA-1020 User Manual
26
To access some components and perform certain service procedures, you must perform the following
procedures first.
Warning
: 1. To reduce the risk of personal injury, electric shock, or damage to the equipment,
please remove all power sources. 2. Please wear ESD protected gloves before conducting the
following steps. 3. NOT pile any object onto the system.
1.
Power off NCA-1020 completely and remove all power connections.
2.
Turn the system upside down and locate the four footing screws.
3.
Remove the 4 screws from the bottom, as circled in the figures below.
4.
Turn the system back to its original position and gently lift the top compartment up.
