support@lanoptik.com
- 14 -
Chart 6 Instructions
6.1 Start to use
1
、
Software installation (software installation and usage instructions, please refer to the software
manual)
2
、
Stage assembly (Detailed reference 5.1
）
3
、
Cable connection (Detailed reference 5.2
）
6.2 Instructions
1
、
After the device is connected, open the software.
2
、
Turn on the main switch of the device and turn on the light as needed.
3
、
Place the object on the workbench and observe them with rotating ball head or Clamp holder
according to different needs. The ball head or the collet according to different objects.
1
）
For cylindrical, spherical, etc., to view the entire outer surface, can match rotating ball head
together with Clamp holder.
2
）
For small objects, it is difficult to be placed flat. Can use clamp holder to lock it.
4
、
According to the height of the observed object, adjust the lifting handle until the image is clear.
5
、
According to the imaging requirements, the focus and magnification of the microscope can be
adjusted to make the image clearer; Adjust the position of the table to adjust the imaging position
of the object.
6
、
Software operation (detailed reference: software manual)
User Manual | Digital
Comparison Microscope BD1
601
www.lanoptik.com
