www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1522 User Manual
16
Wireless - Access Control
If you enable wireless access control,
only those clients whose wireless MAC
addresses are in the access control list
will be able to connect to your Access
Point. When this option is enabled, no
wireless clients will be able to connect
if the list contains no entries.
Screen snapshot
Wireless Access Control
Item
Description
Wireless Access
Control Mode
Click the Disabled, Allow Listed or Deny Listed of drop down menu choose wireless
access control mode.
This is a security control function; only those clients registered in the
access control list can link to this WLANAP Router.
MAC Address
Fill in the MAC address of client to register this WLAN AP Router access capability.
Comment
Fill in the comment tag for the registered client.
Apply Changes
Click the Apply Changes button to register the client to new confi guration setting.
Reset
Click the Reset button to abort change and recover the previous confi guration setting.
Current Access Control
List
It shows the registered clients that are allowed to link to this WLAN AP Router.
Delete Selected
Click to delete the selected clients that will be access right removed
from this WLAN AP Router.
Delete All
Click to delete all the registered clients from the access allowed list.
Reset
Click the Reset button to abort change and recover the previous
confi guration setting.
WDS Settings
Wireless Distribution System uses
wireless media to communicate with
other APs, like the Ethernet does.
To do this, you must set these APs
in the same channel and set MAC
address of other AP that you want to
communicate with in the table and
then enable the WDS.
Screen snapshot - WDS Setup
3.3.7
3.3.8