www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1522 User Manual
17
Item
Description
Enable WDS
Click the check box to enable wireless distribution system. Refer to 4.21 What is
Wireless Distribution Svstem (WDS)?
MAC Address
Fill in the MAC address of AP to register the wireless distribution system access
capability.
Comment
Fill in the comment tag for the registered AP.
Apply Changes
Click the Apply Changes button to register the AP to new confi guration setting.
Reset
Click the Reset button to abort change and recover the previous confi guration setting.
Set Security
Click button to confi gure wireless security like WEP(64bits), WEP(128bits),
WPA(TKIP), WPA2(AES) or None
Show Statistics
It shows the TX, RX packets, rate statistics
Delete Selected
Click to delete the selected clients that will be removed from the wireless distribution
system.
Delete All
Click to delete all the registered APs from the wireless distribution system allowed
list.
Reset
Click the Reset button to abort change and recover the previous confi guration setting.
I. WDS Security Setup.
Requirement: Set [Wireless]->[Basic Settings]->[Mode]->AP+WDS
This page is used to confi gure the wireless security between APs. Refer to 3.3.6 Wireless Security Setup.
Screen snapshot
WPS Security Setup
II. WDS AP Table.
This page is used to show WDS statistics.
Screen snapshot - WDS AP Table
