background image

www.lanpro.com

Wireless - Equipment - 2.4 GHz - LP-1522 User Manual 

36

What is Advanced Encryption Standard (AES)?

Security issues are a major concern for wireless LANs, AES is the U.S. government’s next-generation cryptography 

algorithm, which will replace DES and 3DES.

4.19

What is Inter-Access Point Protocol (IAPP)?

The IEEE 802.1 If Inter-Access Point Protocol (IAPP) supports Access Point Vendor interoperability, enabling roaming 

of 802.11 Stations within IP subnet.

IAPP  defi nes  messages  and  data  to  be  exchanged  between  Access  Points  and  between  the  IAPP  and  high  layer 

management entities to support roaming. The IAPP protocol uses TCP for inter-Access Point communication and UDP 

for  RADIUS  request/response  exchanges.  It  also  uses  Layer  2  frames  to  update  the  forwarding  tables  of  Layer  2 

devices.

4.20

What is Wireless Distribution System (WDS)?

The Wireless Distribution System feature allows WLAN AP to talk directly to other APs via wireless channel, like the 

wireless bridge or repeater service.

4.21

What is Universal Plug and Play (uPNP)?

UPnP is an open networking architecture that consists of services, devices, and control points. The ultimate goal is to 

allow data communication among all UPnP devices regardless of media, operating system, programming language, 

and wired/wireless connection.

4.22

What is Maximum Transmission Unit (MTU) Size?

Maximum  Transmission  Unit  (MTU)  indicates  the  network  stack  of  any  packet  is  larger  than  this  value  will  be 

fragmented before the transmission. During the PPP negotiation, the peer of the PPP connection will indicate its MRU 

and will be accepted. The actual MTU of the PPP connection will be set to the smaller one of MTU and the peer’s MRU. 

The default is value 1400.

4.23

What is Clone MAC Address?

Clone MAC address is designed for your special application that request the clients to register to a server machine 

with  one identifi ed MAC address. Since that all  the clients  will  communicate outside  world  through the WLAN AP 

Router, so have the cloned MAC address set on the WLAN AP Router will solve the issue.

4.24

What is DDNS?

DDNS is the abbreviation of Dynamic Domain Name Server. It is designed for user own the DNS server with dynamic 

WAN IP address.

4.25

What is NTP Client?

NTP client is designed for fetching the current timestamp from internet via Network Time protocol. User can specify 

time zone, NTP server IP address.

4.26

What is VPN?

VPN is the abbreviation of Virtual Private Network. It is designed for creating point-to point private link via shared or 

public network.

What is IPSEC?

IPSEC is the abbreviation of IP Security. It is used to transferring data securely under VPN.

For Additional Support: 

support@lanpro.com

4.27

4.28

Summary of Contents for LP-1522





































Reviews: