www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-1522 User Manual
3
Software confi guration
The web based management and confi guration functions easily allow you perform the step-by-step confi guration.
The WLAN AP Router is delivered with the following factory default parameters on the Ethernet LAN interfaces.
Default IP Address: 192.168.1.254
Default IP subnet mask: 255.255.255.0
WEB login User Name: <empty>
WEB login Password: <empty>
2. Move mouse and double-click the right button on Network icon. The Network window will appear.
3. Check the installed list of Network Components. If TCP/IP is not installed, click the Add button to install it; otherwise go
to step 6.
4. Select Protocol in the Network Component Type dialog box and click Add button.
5. Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to install the TCP/IP protocol, it
may need the Microsoft Windows CD to complete the installation. Close and go back to Network dialog box after the TCP/
IP installation.
6. Select TCP/IP and click the properties button on the Network dialog box.
7. Select Specify an IP address and type in values as following example.
• IP Address:
192.168.1.1
, IP address within the range of 192.168.1.1 to 192.168.1.253 is used to connect the
WLAN AP Router.
• IP Subnet Mask:
255.255.255.0
8. Click OK and reboot your PC after completing the IP parameters setting.
2.2
Software Installation
There are no software drivers, patches or utilities installation needed, but only the confi guration setting. Please refer
to chapter 3 for software confi guration.
Notice:
It will take about 1 minute to complete the boot up sequence after powered on the WLAN AP Router; Power LED will be
active, and after that the WLAN Activity LED will be fl ashing to show the WLAN interface is enabled and working now
.
3.1
Prepare your PC to confi gure the WLAN AP Router
For Microsoft Windows 95/ 98/ ME:
1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.
Note:
Windows Me users may not see the Network control panel. If so, select View all Control Panel options on the left
side of the window.
6
