Open your selected browser and input the same default address: 192.168.1.254,
as you can see in Figure 7.
In
figure 8,
select:
Operation
Mode.
Select:
Bridge.
Click:
Apply changes.
Once you see the window shown in
Figure 9, indicating “Change setting
successfully!” then click:
oK.
6
2
figure 7
7
8
figure 8
figure 9
In the windows shown in Figure 10,
select:
Wireless, Basic Settings,
in:
Mode,
select:
WDS,
verify the
channel, because it must be the
same in all equipment, then select:
Apply changes,
the equipment will
restart.
9
figure 10
In the windows shown in Figure 11,
select:
Wireless, WDS Settings
and the add
LAN MAc address
of the routers that will work under
this mode, except the MAC Address
already configured. Remember to
click on:
Apply changes,
for each
one of the equipment.
10
figure 11
For this configuration you will need MAC addresses of the equipment that will be
part of the Point-to-Point and Multipoint link connection(s).
5
