www.lanpro.com
Wireless - Equipment - 2.4 GHz - LP-349 123 Manual in AP Mode
2
The following Instruction Manual will guide you on how to configure the LP-349 in AP Mode.
Figure 1
1
2
3
Once the Setup 123 Manual has been executed, proceed to
configure it by first connecting the UTP cable that comes
from the LP-349 to the
To Odu
port of the PoE Injector
furnished with the radio as shown in figure 1.
Connect an UTP cable from the
To Ethernet
port of the PoE
injector to the Switch or PC as shown in figure 2.
Figure 2
4
Connect electric power to the PoE injector as shown
in figure 3.
Please go to your network card properties window and
select:
Internet Protocol
, then select:
Properties
, as
shown in figure 4.
Figure 3
Figure 4
