www.lanpro.com
Wireless - Equipment - 5.8 GHz - 123 Manual for Installing the LP-5ai in AP Mode
4
8
In the window shown in figure 8, input the word: admin in:
Name and the word: password in: Password
and then
select:
Login now.
Figure 8
9
In the window shown in figure 9 you have the option of
configuring up to eight(8) Virtual APs in the LP-5ai, and you
will be able to connect up to 32 clients (If you enable that
option of course) to each one of them.
By default, the LP-5ai comes in AP mode, but if this is
not the case, please select option: Basic Settings in the
submenu of Wireless Setup
and then select:
Access Point
as shown, then select: Apply.
Figure 9
10
In the window shown in figure 10, in: SSID
proceed to select:
Edit in order to configure the virtual AP’s. In this page you
will also be able to configure the channel or frequency in
which you wish to transmit, it is important to mention now
that all the VAP’s will be in the same frequency and channel.
Figure 10
