www.lanpro.com
Active Products - Switches - Rack Series - LP-SG2402FP3x
1 2 3 Manual for Power Supply Voltage range change from 100-120VAC to 200-240 VAC
3
Locating the Range switch
Changing the Voltage range
Changing the Input voltage range label to reflect the new range
2
3
4
Locate the voltage range
selector, it is on one side of
the power supply module as
shown in Figure 2.
You can change the input power voltage range, we suggest that you use the tip of a flat screwdriver to flip the selector
switch to the right until the 230 V Range value appears in the window as shown in Figure 3.
Please peel off the backing of the replacement new range label and align and adhere over the old label as shown in Figure 4.
Figure 2
Figure 3
