TF1100-EH transit-time handheld flowmeter manual
35
APPENDIX 2 DATA LOGGER USEGE
Meter Setting Before Using Data Logger
Before using the data logger, please check the following items of meter settings (otherwise,
the data logger will not work normally):
I. In Menu 60, it is time setup for meter, the format should be:
YY-MM-DD (For example, it is Aug 14, 2015 today, the
Menu 60 setting should be 15-08-14)
HH-MM-SS (Hour-minute-second, in 24 hour format)
II. In Menu 50
Select
Logger Options
ON
III. Menu51, you setup start time (later than Menu 60 time, had better at least later 2
minutes), or setting up start time as: Start **:**:** is also Okay.
or
IV. Menu 52,
Select
0. To RS-232
V. Menu 62
Select
Baudrate: =9600
Parity: None
Then insert the Data Logger module. The meter will restart, which means the data logger
works well.
IMPORTANT:
Restart the meter is a must before data logger working. Only insert the SD
card the meter will not restart, and the data logger will
stop recording data.
5.6.3 Read Data
M60
Date 15-08-14
Time 15:16:46
M50
Logger Options
ON
M51 Logger Setup
Start 15:20:00
Intervl 00:00:05
Go On **:**:**
M51 Logger Setup
Start **:**:**
Intervl 00:00:05
Go On **:**:**
M62
RS-232C Setup
Baudrate: =9600
Parity: None
M52
Data Output
0. To RS-232
