Shanghai Lansing Electronics Co., Ltd
Tel：+86 021-39921107 Fax：+86 021-39921107 Web：www.lansinglight.com
E-mail：sales@lansinglight.com
Add: No 609, Tahui Rd, Shihudang Town, Songjiang Dist Shanghai, China, 201612
All rights reserved by Lansing,without the written authorization of the Lansing, any part thereof shall not be reproduced or transmitted in any form.
TY10S LED Single Low Intensity Solar
Powered Obstruction Light (Type A)
5 / 6
5 / 6
Installation and operation:
Option 1
1. Secure the light on a smooth surface which has enough strength, if there is no mounting
surface, we can customize special mounting bracket as request
2. When installation, please stay away the nearby light source
3. Use 4XM8 screws to fix the light base on the smooth place
Option 2
:
Use a MBP80 Mounting brackets below picture) to fix the light on the pole, pipe, telecom
tower or any other places required the light.
Notice:
• The part of material of products is PC( like lamp cover and lamp shell ), so it cannot direct
or indirect touch the organic solvent, such as industrial alcohol, banana oil, isopropyl alcohol,
carbon tetrachloride, cyclohexanone and so on, otherwise, the product will be corrosion.
• Please read the instruction manual carefully before operation.
• For protection of batteries during transport and storage, lights bottom installed sleep
switch, and is set to sleep mode, please check whether the lamp is in normal working
condition before installation or testing, turn on the switch according to the instruction.
• The bottom of the switch control: Press 3 to 5 seconds, the light starts to sleep (stopped
working); Press 1 to 2 seconds, the lights began to work); testing and operation of switches in
the dark environments, or covered with black shade cloth in order to operate correctly.
• Any question in operation please contact our company.
