• The breast cushion and containers may be cleaned in the upper compartment of your dishwasher
or hand washed with dish soap in hot water. For best results, we recommend using a baby bottle
brush to clean the container and a teat brush to clean the insides of the breast cushion. DO NOT use
solvents or abrasives.
• Rinse with hot, clean water.
• All other parts of the Breastmilk Expression Set should be hand washed to prevent loss and extend
their usefulness.
• To clean your breast pump, wipe the base with a damp cloth, using only water or mild soap.
• Do not wash or sterilise the tubing or tubing connector.
• Note: For best results, make sure the diaphragms are completely dry before use.
• Note: Before using the Breastmilk Expression Set, visually inspect the individual components for
cracks, chips, tears, discoloration or deterioration, as this may affect the functionality of the
Breastmilk Expression Set.
Please visit www.lansinoh.co.uk or call +44 (0) 113 205 4201 in the UK or contact your country
distributor for further guidance and replacement parts.
Assembling the Breastmilk Expression Set Your Breastmilk Expression Set comes preassembled in
Lansinoh® product packaging. Clean Breastmilk Expression Set parts (except tubing and tubing
connector) as described in the “Cleaning Instructions” section. Once all parts are clean and
completely dry, assemble the expression set as follows: f Diaphragm Cap g Diaphragm h ComfortFit™
Breast Cushions i Breast Cushion Body j White Valve k 160ml Breastmilk Collection Container
1. Place purple diaphragm on top of breast cushion body. Then place and twist the diaphragm cap
onto breast cushion body enclosing the purple diaphragm.
2. Push ComfortFit™ breast cushion into breast cushion body.
3. Gently secure white valve into the bottom of breast cushion body. Note: Use caution when
handling and cleaning the small white valve.
4. Screw collection container onto breast cushion body.
5. Insert tubing into back of diaphragm cap; ensure tight fit.
6. Insert tubing connector between the sets. Place tubing input into the pump. 06. Pumping Tips The
most important part of successful pumping is the ability to trigger the let-down reflex. This is when
your milk begins to flow freely. Warm wet compresses applied to the breasts and gentle, circular
massaging of the breasts prior to and/or during a pumping session can help encourage this natural
reflex. Thinking of or looking at your baby, or a photo of your baby if you are apart, can also be
helpful. You also may wish to try the Lansinoh® Therapearl® 3in1 Breast Therapy which can help with
your milk let-down. Some mums can achieve more than one let-down during a pumping session. You
may be 4 able to achieve a second or third let-down during your pumping session by returning to the
Let Down (Stimulation) Phase by pressing the Let-Down Button.
How Long To Pump Whilst the Lansinoh® 2in1 Electric Breast Pump can be used as a single breast
pump, double pumping compared to single pumping will reduce the time you spend expressing your
milk. Breastmilk is produced on a supply and demand basis and by expressing your breastmilk
