background image

Lansinoh

®

 ComfortFit

®

 Flanges

Instruction For Use

Lansinoh® ComfortFit® Flanges 

were designed for use with

Lansinoh breast pumps. For best results, use these flanges only

with Lansinoh breast pumps.

Cleaning Instructions

Unless otherwise instructed by your healthcare provider, follow

these sanitizing and cleaning instructions:

Before First Use and Daily Sanitization

1.

  Prior to using the set for the first time, boil for 5 minutes. Ensure

you use enough water to keep flanges afloat while boiling.

2.

  After boiling remove from the pot with tongs and place on

a clean towel or paper towel to dry. Covering the flanges 

with a second towel.

3.

  Allow the flanges to dry completely before assembly and use.

After Each Use

1.

  Rinse the flanges with cold water immediately after

each use. Place the flanges in a clean wash basin used

only for washing infant feeding equipments. Do not place 

directly in the sink, because germs in sinks or drains could 

contaminate the flanges.

2.

  Wash the flanges using warm soapy water.

3.

  Rinse with running clean, warm water or by submerging in 

fresh water in a separate basin that is used only for cleaning 

infant feeding equipments.

4.

 Place the flanges on a clean towel or paper towel to dry in 

an area protected from dirt and dust. 

Do not

 use a dish towel 

or paper towel to rub or pat the flanges dry.

5.

  Once the flanges are dry they can be stored in a clean plastic 

bin with a lid or in a clean plastic zipper bag.

6.

 

Do not

 use disinfectants for cleaning flanges.

Before Each Use

1.

  Always wash hands thoroughly with soap and water before 

handling the flanges, breastmilk expression set, the pump 

body, or other attachments.

2.

  Visually inspect the individual components for cracks, chips, 

tears, discoloration or deterioration, as this may affect the 

functionality of the breastmilk expression set. Please call 

1-800-292-4794

 or email 

customerservice@lansinoh.com

for further guidance and replacement parts.

Assembly

Firmly push 

ComfortFit® Flange

 into breast flange

body as shown:

Correct fit

Nipple is easily drawn into 

tunnel and moves freely.

Too small

Nipple rubs along 

flange tunnel.

Too large

Too much room around 

nipple in the flange.

Distributed exclusively by:

Lansinoh Laboratories, Inc.

Alexandria, VA  22314 USA

+1 800-292-4794

Lansinoh.com

DE53510IF0820

Lansinoh Laboratories

Saglik Gerecleri Tasarim San. Tic. Ltd. Sti.

Zafer SB Mah. Gunduz Sk. No:13 E.S.B

Gaziemir/ Izmir/ Turkiye

If you feel any discomfort, you may need a different size,

please visit 

www.Lansinoh.com

.

Save these instructions along with your receipt for future reference.

Sizing

Please refer to the sizing information below to ensure

proper flange fit:

A proper fit is essential for a mom’s comfort and maximum milk 

flow. An improperly fitting flange can cause discomfort and 

impact milk let-down and flow.

ComfortFit® is a U.S. 

registered trademark 

by Lansinoh

Reviews: