6
2-Phase Technology
Using Let-Down and Expression Phases
Press the power button
to start the pump in let-down phase.
Let-down phase will run automatically for two minutes.
To begin expression phase sooner, press the let-down/expression toggle
button
to move to the expression phase. Press the let-down/expression
toggle button again at any point to switch back to let-down phase.
Let-down/Expression
Toggle Button
Pumping Style
Toggle Button
Suction Level
Customization for Comfort and Efficiency
Pumping Style Selection
Every baby feeds differently. The
Smartpump 2.0 offers three different
pumping styles to choose from, allowing
you to choose the option that is most
like your baby’s feeding pattern. Change
the pumping style using the style mode
toggle button to find the pumping
style that works best for you.
NOTE: When you turn the pump on for the very first time it starts in let-down mode, suction
level 5. When you switch to the expression mode the pump will start in style 2, suction level 3.
Adjusting Suction Levels
Increase or decrease the suction to the
maximum level that you find comfortable.
Increase suction by pressing the
button. Decrease suction by pressing the
button.
NOTE: When increasing suction, the target suction level will flash, and the pump will slowly
increase suction. The flashing will stop once the target level has been reached.
Lansinoh® is here to support you. If you have questions, please do
not hesitate to
contact us at (800) 292-4794.
Style 1
Style 2
Style 3
