Smart LoRaWAN Bluetooth Gateway
4
/
25
-
Or CS records the first-time configuration and acknowledges the request. If CS contains
some history configuration of the gateway and mismatch occurrs, CS should send the new
configuration to the gateway. Thereafter, the gateway updates and starts working with the
new parameters.
After registration, the user can change the configuration of the gateway. CS needs to save the new
parameters and
CRC16 of the parameters
.
In case the gateway resets after registration, or when receiving periodical heartbeat message,
CS needs to check if any configuration mismatch occurrs. If necessary, CS should send the new
configuration to the gateway in the next downlink window.
4.3
On/Off and LED Status
4.3.1
Indoor Bluetooth Gateway
1)
Turn on: Plug in the charger, the red LED flashes four times, while the green LED is on.
Then the green LED is off, and the red LED is on.
2)
Turn off: Unplug the charger
3)
Joining the network: The green LED is on.
4)
LoRa communication: The green LED flashes once with every LoRa communication.
4.3.2
Compact Bluetooth Gateway
1)
Turn on: Long press the button for four seconds; the red LED flashes four times while the green LED is
on.
2)
Turn off: Long press the button for four seconds, the red LED is
“
on
”
for four seconds and then turns
off.
3)
Reboot: LED status is the same as turning on;
4)
Joining the network: The green LED is on.
5)
After joining the network, Press the button once:
a)
Green LED is on: Successfully joined.
b)
Green LED is off: Joining failed, or the gateway is in off state.
6)
In ON state, press the button three times, the green LED blinks three times, the gateway rejoins the
network.
7)
Charge: red LED flashes every second.
8)
Charge done: solid red LED.
4.3.3
Macro Bluetooth Gateway & Solar Bluetooth Gateway
1)
Turn on: Long press the power on button 3-5 seconds until the gateway beeps once.
Find the power button on the sidebar, labeled with Power On/Off label
2)
Turn off: Long press the power on button 3-5 seconds until the gateway beeps 3 times
3)
Joining the network: no sign, please check the packets in the network server
