© Lanta Lighting™ 2010. Terms Apply. All trademarks are the property of their
respective owners. E&OE. All specifications and details are correct at time of print.
Revision 1
Owner Handbook Aurora 1000™
Operating Modes
Five distinct operating modes are supported by the unit. To select, use the “A” button to
enter the menu. The “B” button steps through specific settings for each operating mode.
1- In-built Program Mode
One of the 7 in-built Effects is run. In this mode the LED Display will show values from
“P.01” to “P.07”. To enter this mode, hold the “A” button for approximately three seconds to
display“P.01”. Effects are;
LED Display Shows
Effect
P.01
Static Colour
P.02
Colour Change
P.03
Jumping Colours
P.04
Dreaming Colours
P.05
Red Fade
P.06
Green Fade
P.07
Blue Fade
Static Colours (P.01 Only)
In this sub-mode a static colour mix can be chosen. With the LED Display reading “P.01”,
press “A”. The “B” button steps between options. These are;
LED Display Shows
Colour Mix
1--h
Red
2-hG
Yellow
3--G
Green
4-G6
Light Blue
5--6
Dark Blue
6-h6
Purple
70n
White
80F
Off
