HR-114 II 1 WAN 4 LAN Broadband Router
HR-114 II 1 WAN 4 LAN Broadband Router
22
User Guide
23
2-1-7 Reset :
In the event that the Broadband Router stops responding
correctly or in some way stops functioning, perform the reset function.
The settings will not be changed. To perform the reset, click on the “Reset”
button. The reset will be complete when the system light starts blinking.
2-2 WAN :
The Broadband Router can be connected to the service provider
in any of the following ways: Dynamic IP Address, Static IP Address,
PPPoE and PPTP.
2-2-1 Dynamic IP :
The Host Name is optional, but may be required by some
Service Providers. The default MAC address is set to the WAN’s physical
interface on the Broadband Router. If the Service Provider requires the host
name, using the “Clone MAC Address” button to copy the MAC address
of the Network Interface Card installed in the selected PC and replaces the
WAN MAC address with this MAC address.
The road runner management is optional. If the ISP needs to run the road
runner management (sometimes called Big Pond), enable it.
