55
IP Address:
Assign the IP address that the network is using. If DHCP client function
is enabled, then user needn
‘t assign the IP address manually. Instead, the network
DHCP server will assign the IP address for the industrial switch and display it in this
column. The default IP is 192.168.16.1
Subnet Mask:
Assign the subnet mask of the IP address. If DHCP client function is
enabled, and then user needn
‘t assign the subnet mask manually
Gateway:
Assign the network gateway for the industrial switch. The default gateway
is 192.168.16.254
DNS1:
Assign the primary DNS IP address.
DNS2:
Assign the secondary DNS IP address.
And then, click
Apply
IP configuration interface
DHCP Server
– System configuration
The system provides the DHCP server function. Enable the DHCP server function, the
switch system will be a DHCP server.
DHCP Server:
Enable or Disable the DHCP Server function. Enable
– the switch
will be the DHCP server on your local network.
Low IP Address:
the dynamic IP assign range. Low IP address is the beginning of
the dynamic IP assigns range. For example: dynamic IP assign range is from
192.168.1.100 ~ 192.168.1.200. 192.168.1.100 will be the Low IP address.
High IP Address:
the dynamic IP assign range. High IP address is the end of the
