57
only. When the packet received by port 1, the system will check the ToS value of the
received IP packet. If the ToS value of received IP packet is 25(priority = 7), and then
the packet priority will have highest priority.
6.9 Security
6.9.1 MAC Address Tables
Use the MAC address table to ensure the port security.
Static MAC Address
You can add a static MAC address; it remains in the switch's address table,
regardless of whether the device is physically connected to the switch. This saves the
switch from having to re-learn a device's MAC address when the disconnected or
powered-off device is active on the network again. You can add / modify / delete a
static MAC address. MAC Address: Enter the MAC address of the port that should
permanently forward traffic, regardless of the device network activity. VLAN ID :
Entering the VLAN ID. Port No : pull down the selection menu to select the port
number.
MAC Filtering
By filtering MAC address, the switch can easily filter pre-configure MAC address and
reduce the un-safety. You can add and delete filtering MAC address. MAC Address:
Enter the MAC address that you want to filter.
All MAC Addresses
Summary of Contents for IPES-3408GSFP
