79
p2p_mode
description: Controls whether the port connects to a point-to-point LAN rather than a
shared medium. This can be automatically determined, or forced either true or false.
Transition to the forwarding state is faster for point-to-point LANs than for shared
media.
6.14.3. MSTP MSTI Settings
Instance No
VLANs
The list of VLANs mapped to the MSTI. The VLANs must be separated with comma
and/or space. A VLAN can only be mapped to one MSTI. An unused MSTI should
just be left empty. (I.e. not having any VLANs mapped to it.) Unmapped VLANs are
mapped to the CIST. (The default bridge instance).
Priority
Controls the bridge priority. Lower numeric values have better priority. The bridge
priority plus the MSTI instance number, concatenated with the 6-byte MAC address
of the switch forms a Bridge Identifier.
Summary of Contents for IPES-3408GSFP
