10
3.1 Rack Mounting
When installing the I(P)ES-3424DSFP-2P switch in a 19 inch rack, it must always be
mounted horizontally with the top side up, This procedure requires the following items:
■ Eight bracket screws (included with the switch)
■ Two equipment rack brackets (included with the switch)
■ Cross-head screwdriver (not provided)
■ Four standard equipment rack screws (not provided)
Perform this procedure to install the switch in a 19-inch equipment rack:
1. Secure the two rack mount brackets to the sides of the switch using the eight
bracket screws provided.
2. Have another person hold the switch in the equipment rack while you secure it
using standard rack mount screws (not provided).
