20
4.2. Login in the Console Interface
When the connection between Switch and PC is ready, turn on the PC and run a
terminal emulation program
or
Hyper Terminal
and configure its
communication
parameters
to match the following default characteristics of the console port:
Baud Rate:115200 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
Having finished the parameter settings, click
‘
OK
’. When the blank screen shows up,
press Enter key to have the login prompt appears. Key in
‘
admin
’ (default value) for both
User name and Password (use
Enter
key to switch), then press Enter and the Main
Menu of console management appears. Please see below figure for login screen.
