73
Set the outgoing frames as VLAN-Tagged frames or untagged.
¾
Tag:
The outgoing frames involve VLAN tag.
¾
Untag:
The outgoing frames don’t involve VLAN tag.
And then, click
Apply
button.
~
Port VID:
Configure port VID.
VLAN ID:
Set the port VLAN ID that will be assigned to untagged traffic on a given
port. This feature is useful for accommodating devices that you want them to join
in the VLAN which doesn’t support tagging. Each port of the switch allows the user
to set one VLAN ID (the range is from 1 ~ 255 and the default VLAN ID is 1). The
VLAN ID must be as same as the VLAN ID of the VLAN group that the port
belongs to, or the untagged traffic will be dropped.
Ingress Filtering:
Ingress filtering lets frames belonging to a specific VLAN to be
forwarded if the port belongs to that VLAN.
¾
Enable
: Forward only when the packets with VID match the configured VID of
this port.
¾
Disable
: Disable Ingress filter function.
Acceptable Frame type:
¾
ALL:
Acceptable all Packet.
¾
Tag Only:
Only packets with matched VLAN ID have the permission to go
through the port.
And then, click
Apply
button.
