81
SNTP Configuration
Configure the SNTP (Simple Network Time Protocol) setting which SNTP allows the
switch to synchronize switch clocks in the Internet. Use this page to Enable/Disable
SNTP client; set SNTP server IP address, and UTC (Coordinated Universal Time)
timezone.
SNTP Client:
Enable or disable SNTP function to get the time from the SNTP
server.
UTC Timezone:
Enter between -12 and +13 in the UTC Timezone field. For
example, 8.5 means UTC +8.5 hours.
Server IP:
Assign the SNTP server IP address.
Switch Timer:
Displays the current time of the switch.
SNTP Configuration Interface
802.1X Configuration
When the IEEE 802.1X protocol is enabled, user can configure the parameters of
802.1X. To enable the IEEE 802.1X protocol, go to
Administrator
Æ
Switch Setting
Æ
Misc Config
System Configuration
