3
NOTE
IMPORTANT
The installation instructions in this guide should be followed otherwise the
warranty will be void.
It is the duty of the installer to pass on user and maintenance instructions to
the end user. The installer must also demonstrate the blind is fully working in
their handover to the end user.
Motorised blinds must be connected to an RCD protected circuit.
It is the installers responsibility to ensure that suitable fixings are used to
secure the blind in place
It is the installers responsibility to ensure safety is always maintained. A full
risk assessment must be carried out and documented prior to installation.
Use these instructions to fit the blind. The product has evolved slightly since
the fitting video was produced.
BEFORE INSTALLATION
If you are unsure of any element of the install, please contact us before
proceeding
All components should be checked for damage. Damaged components should
be reported to us prior to the installation beginning.
Summary of Contents for KuroLok RL
Page 1: ...FITTING INSTRUCTIONS 1...