PC Fiberlynx User Guide
PC Fiberlynx User Guide
PC Fiberlynx User Guide
PC Fiberlynx User Guide Lightwave
Communications
Lightwave Communications
Lightwave Communications
Lightwave Communications
2-6
www.lightwavecom.com
PS/2-Only model
PCFiberlynx (PS/2 Only) transmitter
1.
Place the CPU with the PCFiberlynx transmitter. Connect the keyboard and mouse ports
of the CPU to the keyboard and mouse ports of the PCFiberlynx transmitter using the
provided 6 pin mini-DIN cables.
2.
Connect the video output of the CPU to the lower video connector (
VIDEO IN
) of the
transmitter using the provided HD15 (VGA) cable. A monitor may be attached to the
upper video connector to view the video output of the CPU locally.
3.
Connect the CPU audio ports to the transmitter using the provided 3.5 mm audio cables.
The port marked “MIC OUT” on the transmitter connects to the microphone port on the
CPU, while the “LINE IN” port on the transmitter connects to the speaker port on the
CPU.
4.
Connect the CPU serial port to the transmitter serial port using the provided cable.
5.
Connect the transmitter to AC power and turn on the switch. The status LEDs found on
the front of the unit should light.
