Lantronix
x4120 User Guide
33551 Rev. C
Page
130
of
142
TFTP Server Messages
Messages like the ones below may display during TFTP Server operation, depending on the TFTP Server
package that you selected.
Message
:
File does not exist
Meaning
: A TFTP Server error - the TFTP Server Address that you specified does not contain the Firm-
ware File Name specified.
Recovery
: 1) Verify the TFTP server’s correct file location (e.g., local disk at
C:\TFTP-Root
). 2) Make
sure of the filename / extension. 3) Check the TFTP Server’s online helps for suggestions.
Message
:
File too large for TFTP Protocol
Meaning
: A TFTP Server error - you tried to upload a file e.g., (IONMM.bin.0.5 – 50Mb) but the TFTP
server failed. The file you tried to upload via the TFTP server exceeded the file size capability.
Recovery
: 1) Check if some extra files ended up in the zip folder – some repeated – 6 FW files total.
2) Remove some of the files from the zip folder and try the upload again. 3) Send the remaining files in a
separate file. 4) Check the TFTP Server’s online helps for suggestions.
