Lantronix
x4120 User Guide
33551 Rev. C
Page
68
of
142
This command is only available on <x222x / x32xx> card!
1. Verify the command entered is the one you want.
2. Verify that the device for the command entered can support the function of the command.
3. Retry the operation.
4. If the problem persists, contact Technical Support.
Error: this command should be executed on a port!
1. Verify the command entered is the one you want.
2. Change to the desired port; enter the
go
command with all of the location parameters (chassis / slot /
port).
3. Retry the operation from the port (i.e., type
show fwd portlist
and press
Enter
).
Unknown command!
The command you entered is not supported, or you entered the wrong command format / syntax.
1. Verify the CLI command syntax.
2. Retry the operation.
3. For a complete list of the available commands, see the
x4120 CLI Reference Manual, 33497
.
4. If the problem persists, contact Technical Support. There is no matched command.
The command you entered is not supported, or you entered the wrong command format / syntax.
1. Verify the CLI command syntax.
2. Retry the operation.
3. For a complete list of the available commands, see the
x4120 CLI Reference Manual, 33497
.
4. If the problem persists, contact Technical Support.
