EDS-MD User Guide
30
5:
Configuration Using Web Manager
This chapter describes how to configure the EDS-MD4, EDS-MD8 and EDS-MD16 using Web
Manager, the Lantronix browser-based configuration tool. The unit’s configuration is stored in
nonvolatile memory and is retained without power. All changes take effect immediately, unless
otherwise noted. It contains the following sections:
Accessing Web Manager
Web Manager Page Components
Navigating the Web Manager
Accessing Web Manager
Note:
You can also access the Web Manager by selecting the Web Configuration tab on
the DeviceInstaller window.
To access Web Manager, perform the following steps:
1.
Open a standard web browser. Lantronix supports the latest version of Internet Explorer,
Mozilla Suite, Mozilla Firefox, Safari, Chrome or Opera.
2.
Enter the IP address of the EDS-MD4/8/16 in the address bar. The IP address may have been
assigned manually using DeviceInstaller (see the
EDS-MD Quick Start Guide
) or automatically
by DHCP.
3.
Enter your username and password.The factory-default username is “admin” and the
password is “PASS.” The Device Status web page displays configuration, network settings,
line settings, tunneling settings, and product information.
Note:
The Logout button is available on any web page. Logging out of the web page
would force re-authentication to take place the next time the web page is accessed.
