6: Line and Tunnel Settings
EDS-MD User Guide
44
To Configure Tunnel Modem Emulation Settings
Using Web Manager
To configure the Modem Emulation for a specific tunnel, click
Tunnel
in the menu and select
Tunnel 1 -> Modem Emulation
.
Using the CLI
To enter the Tunnel 1 Modem command level:
enable -> tunnel 1 -> modem
Using XML
Include in your file:
<configgroup name=”tunnel modem” instance=”1”>
Statistics
Tunnel statistics contains data counters, error counters, connection time and connection
information. Statistics are available at each individual connection and aggregated across all
connections.
To View Tunnel Statistics
Using Web Manager
To view statistics for a specific tunnel, click
Tunnel
in the menu and select the
Tunnel 1 ->
Statistics
.
Response Type
Select a representation for the Modem Response Codes sent out on the Serial
Line. Choices are:
Text
(ATV1) (default)
Numeric
(ATV0)
Error Unknown
Commands
Set whether the Error Unknown Commands is enabled (ATU0) and ERROR is
returned on the Serial Line for unrecognized AT commands. OTherwise
(ATU1) OK is returned for unrecognized AT commands. Choices are:
Enabled
Disabled
(default)
Incoming Connection
Set how and if requests are answered after an incoming RING (ATS0=2).
Choices are:
Disabled
(default)
Automatic
Manual
Connect String
Enter the customized Connect String sent to the Serial Line with the Connect
Modem Response Code.
Display Remote IP
Set whether the Display Remote IP is enabled so that the incoming RING sent
on the Serial Line is followed by the IP address of the caller. Choices are:
Enabled
Disabled
(default)
Tunnel Modem
Emulation Settings
Description
