7: Network Settings
EDS-MD User Guide
48
Network Link Settings
Physical link parameters can be configured for an Ethernet (eth0) Network Interface (see
Table 7-2
).
Table 7-2 Network 1 (eth0) Link Settings
Notes:
When speed is Auto, duplex must be Auto or Half.
When speed is not Auto, duplex must be Half or Full.
Fixed speed Full duplex will produce errors connected to Auto, due to duplex
mismatch.
To Configure Network Link Settings
Using Web Manager
To modify Ethernet (eth0) Link information, click
Network
on the menu and select
Network 1 -> Link
.
Using the CLI
To enter the eth0 Link command level:
enable -> config -> if 1 -> link
Using XML
Include in your file:
<configgroup name="ethernet" instance="eth0">
Network 1 Ethernet (eth0)
Link Settings
Description
Speed
Select the Ethernet link speed. (Default is Auto)
Auto
= Auto-negotiation of Link Speed
10
= Force 10 Mbps
100
= Force 100 Mbps
Duplex
Select t he Ethernet link duplex mode. (Default is Auto)
Auto
= Auto-negotiation of Link Duplex
Half
= Force Half Duplex
Full
= Force Full Duplex
