8: Terminal and Host Settings
EDS-MD User Guide
50
To Configure the Terminal Network Connection
Using Web Manager
To configure the Terminal on Network, click
Terminal
on the menu and select
Network ->
Configuration
.
Using the CLI
To enter the Terminal Network command level:
enable -> config -> terminal
network
Using XML
Include in your file:
<configgroup name=”terminal” instance=”network”>
To Configure the Terminal Line Connection
Note:
The following section describes the steps to view and configure Terminal 1
settings; these steps apply to other terminal instances of the device.
Using Web Manager
To configure a particular Terminal Line, click
Terminal
on the menu and select
Line 1 ->
Configuration
.
Using the CLI
To enter the Terminal Line command level:
enable -> config -> terminal 1
Using XML
Include in your file:
<configgroup name=”terminal” instance=”1”>
Host Configuration
Table 8-2 Host Configuration
Host Settings
Description
Name
Enter a name for the host. This name appears on the Login Connect
Menu. To leave a host out of the menu, leave this field blank.
Protocol
Select the protocol to use to connect to the host. Choices are:
Telnet
SSH
Note:
SSH keys must be loaded or created in SSH for the SSH
protocol to work.
