8: Terminal and Host Settings
EDS-MD User Guide
51
To Configure Host Settings
Note:
The following section describes the steps to view and configure Host 1 settings;
these steps apply to other host instances of the device.
Using Web Manager
To configure a particular Host, click
Host
on the menu and select
Host 1 ->
Configuration
.
Using the CLI
To enter the Host command level:
enable -> config -> host 1
Using XML
Include in your file:
<configgroup name=”host” instance=”1”>
SSH Username
Enter a username to select a pre-configured Username/Password/
Key (configured on the SSH: Client Users), or leave it blank to be
prompted for a username and password at connect time.
Note:
This field appears if you selected SSH as the protocol.
Remote Address
Enter an IP address for the host to which the device will connect.
Remote Port
Enter the port on the host to which the device will connect.
Host Settings (continued)
Description
