11: Maintenance and Diagnostics Settings
EDS-MD User Guide
67
To Transfer or Modify Filesystem Files
Using Web Manager
To create a new file or directory, upload an existing file, copy or move a file, click
Filesystem
in the menu and select
Browse
.
Using the CLI
To enter the Filesystem command level:
enable -> filesystem
Using XML
Not applicable.
IP Network Stack Settings
There are various low level network stack specific items that are available for configuration. This
includes settings related to IP, ICMP, ARP and SMTP, which are described in the sections below.
Table 11-4
IP Network Stack Settings
To Configure IP Network Stack Settings
Using Web Manager
To configure IP protocol settings, click
Protocol Stack
in the menu and select
IP
.
Using the CLI
To enter the command level:
enable -> config -> ip
Using XML
Include in your file:
<configgroup name=”ip”>
Protocol Stack
IP Settings
Description
IP Time to Live
This value typically fills the Time To Live in the IP header. SNMP refers to this
value as "ipDefaultTTL".
Enter the number of hops to be transmitted before the packet is discarded.
Multicast Time to Live
This value fills the Time To Live in any multicast IP header. Normally this value
will be one so the packet will be blocked at the first router. It is the number of
hops allowed before a Multicast packet is discarded.
Enter the value to be greater than one to intentionally propagate multicast
packets to additional routers.
