Lantronix EDS-MD Series Command Reference Manual Download

Page: 100 / 738

5: Commands and Levels

EDS-MD® Wired IoT Device Gateway Command Reference

100

write

Stores the current configuration in permanent
memory.

connect (tunnel-connect:13) level commands

block network disable

Forwards (tunnels) network data in connect mode
tunneling.

block network enable

Discards all data coming in from the connect mode
tunnel before forwarding it to the serial interface
(generally used for debugging).

block serial disable

Forwards (tunnels) serial data in connect mode
tunneling.

block serial enable

Discards all data coming in from the serial interface
before forwarding it to the connect mode tunnel
(generally used for debugging).

clrscrn

Clears the screen.

connect mode always

Enables the tunneling server to always establish
tunneling connections.

connect mode any character

Enables the tunneling server to establish a tunneling
connection when a character is received on the
corresponding line (serial port).

connect mode disable

Disables connect mode tunneling.

connect mode modem control asserted

Enables the tunneling server to make tunneling
connections when the modem control pin is
asserted.

connect mode modem emulation

Enables modem emulation for connect mode
tunneling.

connect mode start character

Enables connect mode tunneling when the
configured start character is received on the line.

default connect mode

Restores the default connect mode as "disable".

default host mode

Connects to the first host in the list that accepts the
connection.

default local port

Uses a random port number as the local port for
establishing tunneling connections to other devices.

default reconnect time

Restores the default reconnect time value for
connect mode tunneling.

default start character

Defaults the connect mode start character.

email connect

<number>

Sets an email profile to use to send an email alert
upon establishing a connect mode tunnel.
<number> = the number of the email profile to use.

email disconnect

<number>

Sets an email profile to use to send an email alert
upon closing a connect mode tunnel. <number> =
the number of the email profile to use.

exit

Returns to the tunnel level.

flush serial disable

Characters already in the serial data buffer are
retained upon establishing a connect mode
tunneling connection.

flush serial enable

Flushes the serial data buffer upon establishing a
connect mode tunneling connection.

flush start character disable

Enables forwarding of the connect start character
into the network.

flush start character enable

Disables forwarding of the connect start character
into the network.

Summary of Contents for EDS-MD Series



































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for EDS-MD Series

Reviews:

Related manuals for EDS-MD Series

Brands by name

Popular brands

Lantronix EDS-MD Series, Command Reference Manual

Search results

Summary of Contents for EDS-MD Series

Reviews:

Related manuals for EDS-MD Series

Brands by name

Popular brands