4: Configuration Using XML
EDS-MD® Wired IoT Device Gateway Command Reference
35
XML Status Record Groups and Items
lists the supported XML Status Record (XSR) groups and items. These groups and
items show the status of the device in XML form and can only be exported. The XSR schema
differs slightly from the XCR groups and items in that the XSR allows groups within groups.
Note:
The Valid Values column of
Table 4-8 XSR Group and Items
Group Name
Item Name
Value Name
Valid Values
action:instance (“instance”
attribute is “ethN link state
change”)
alarm state
off, on
duration
duration in N days 00:00:00
(hh:mm:ss)
transitions
arp
arp entry
ip address
ip address in format
nnn.nnn.nnn.nnn
mac address
mac address in format
xx:xx:xx:xx:xx:xx
type
dynamic or static
interface
eth0 or wlan0
clock
time
real time clock time in format
hh:mm:ss <timezone>
date
real time clock date in format
dayofweek day month year
timezone
zone
offset
device
product info
product type
Lantronix EDS-MD
serial number
12 hex digits
firmware version
string in version format like
7.3.0.1R7
uptime
elapsed time in format d
days hh:mm:ss
permanent config
saved or unsaved
email:instance ("Instance"
attribute is "<decimal>")
success
sent
decimal number
sent with retries
decimal number
failed
decimal number
queued
decimal number
email log:instance
("Instance" attribute is
"<decimal>")
entry
time
timestamp in format d days
hh:mm:ss
log
string
failover: instance
(“instance” attribute is
eth0, eth1, eth2)
state
transitions
decimal number
