13: Maintenance and Diagnostics Settings
EDS1100/2100 Device Server User Guide
110
Note:
Both the IP and MAC addresses are required for the ARP cache.
4. Click
Submit
for ARP or
Add
after supplying both address fields for ARP cache.
5. Remove entries from the ARP cache, as desired:
Click
Remove All
to remove all entries in the ARP cache.
OR
Click
Remove
beside a specific entry to remove it from the ARP cache.
SMTP Settings
SMTP is configuration for a basic SMTP proxy. An SMTP proxy in this sense is a simple
forwarding agent.
Note:
Lantronix does not support SMTP AUTH or any other authentication or encryption
schemes for email. Please see
for additional information.
To configure the SMTP network protocol:
1. Select
Protocol Stack
on the menu bar.
2. Select
SMTP
.
Figure 13-12 SMTP
3. Modify the following settings:
Table 13-13 SMTP Settings
4. Click
Submit
.
MAC Address
Enter the MAC address to add to the ARP cache.
Protocol Stack SMTP
Settings
Description
Relay Address
Address of all outbound email messages through a mail server. Can contain
either a hostname or an IP address.
Remote Port
Port utilized for the delivery of outbound email messages.
Table 13-11 ARP Settings
Protocol Stack
ARP Settings (continued)
Description
