EDS1100/2100 Device Server User Guide
35
6: Configuration Using Web Manager
This chapter describes how to configure the EDS1100/2100 device server using Web Manager,
the Lantronix browser-based configuration tool. The unit’s configuration is stored in nonvolatile
memory and is retained without power. All changes take effect immediately, unless otherwise
noted. It contains the following sections:
Accessing Web Manager
Note:
You can also access the Web Manager by selecting the Web Configuration tab on
the DeviceInstaller window.
To access Web Manager, perform the following steps:
1. Open a standard web browser. Lantronix supports the latest version of Internet Explorer,
Mozilla Suite, Mozilla Firefox, Safari, Chrome or Opera.
2. Enter the IP address of the EDS1100/2100 unit in the address bar. The IP address may have
been assigned manually using the DeviceInstaller application (see
EDS1100/2100) or automatically by DHCP.
Figure 6-1 Prompt for User Name and Password
3. Enter your username and password.The factory-default username is
admin
and the factory-
default password is
PASS
. The Device Status web page shown in
displays
configuration, network settings, line settings, tunneling settings, and product information.
Note:
The
Logout
button is available on the upper right of any web page. Logging out
of the web page would force re-authentication to take place the next time the web page is
accessed.
