10: Service Settings
EDS1100/2100 Device Server User Guide
74
2. Enter or modify the following settings:
Table 10-5 SNMP
3. Click
Submit.
FTP Settings
The FTP web page shows the current File Transfer Protocol (FTP) configuration and various
statistics about the FTP server.
To configure FTP:
1. Select
FTP
on the menu bar. The FTP page opens to display the current configuration.
Figure 10-6 FTP Configuration
2. Enter or modify the following settings:
SNMP Settings
Description
State
Select
Enabled
to enable SNMP.
Read Community
Enter the SNMP read-only community string.
Write Community
Enter the SNMP read/write community string.
System Contact
Enter the name of the system contact.
System Name
Enter the system name.
System Description
Enter the system description.
System Location
Enter the system location.
Traps State
Select
Enabled
to enable the transmission of SNMP Traps. The Cold Start
trap is sent on device boot up, and the Linkdown trap is sent when the
device is rebooted from software control.
Traps Primary Destination
Enter the primary SNMP trap host.
Traps Secondary Destination
Enter the secondary SNMP trap host.
