10: Service Settings
EDS1100/2100 Device Server User Guide
79
HTTP Configuration
On this page you may change HTTP configuration settings.
To configure HTTP:
1. Select
HTTP
on the menu bar and then
Configuration
at the top of the page. The HTTP
Configuration page opens.
Figure 10-13 HTTP Configuration
2. Enter or modify the following settings:
Table 10-14 HTTP Configuration
HTTP Configuration
Settings
Description
State
Select
Enabled
to enable the HTTP server.
Port
Enter the port for the HTTP server to use. The default is
80
.
Secure Port
Enter the port for the HTTPS server to use. The default is
443
. The HTTP
server only listens on the
HTTPS
Port
when an SSL certificate is configured.
