13: Maintenance and Diagnostics Settings
EDS1100/2100 Device Server User Guide
107
4. Click
Submit
.
IP Settings
To configure the network protocol settings for IP:
1. Select
Protocol Stack
on the menu bar.
2. Select
IP
.
Figure 13-6 IP Protocol
3. Modify the following settings:
Table 13-7 IP Protocol Settings
4. Click
Submit
.
Max Retrans
Enter the maximum number of retransmissions of a packet that will be attempted
before failing.
Max Retrans Syn/Ack
Enter the maximum number of retransmissions of a SYN that will be attempted
before failing. It is lower than “Max Retrans” to thwart denial-of-service attacks.
Max Timeout
Enter the maximum time between retransmissions.
Protocol Stack
IP Settings
Description
IP Time to Live
This value typically fills the Time To Live in the IP header. SNMP refers to this
value as "ipDefaultTTL".
Enter the number of hops to be transmitted before the packet is discarded.
Multicast Time to Live
This value fills the Time To Live in any multicast IP header. Normally this value
will be one so the packet will be blocked at the first router. It is the number of
hops allowed before a Multicast packet is discarded.
Enter the value to be greater than one to intentionally propagate multicast
packets to additional routers.
Protocol Stack
TCP Settings
Description
