8: Line and Tunnel Settings
EDS1100/2100 Device Server User Guide
65
Figure 8-21 Tunnel 1 Modem Emulation
4. Enter or modify the following settings:
Table 8-22 Tunnel Modem Emulation
5. Click
Submit.
6. Repeat above steps as desired, according to additional tunnel(s) available on your product.
Tunnel- Modem
Emulation Settings
Description
Echo Pluses
Select
Enabled
to echo
+++
when entering modem Command Mode.
Echo Commands
Select
Enabled
to echo the modem commands to the console.
Verbose Response
Select
Enabled
to send modem response codes out on the serial line.
Response Type
Select the type of response code:
Text
or
Numeric
.
Error Unknown
Commands
Select whether an
ERROR
or
OK
response is sent in reply to unrecognized AT
commands. Choices are:
Enabled
=
ERROR
is returned for unrecognized AT commands.
Disabled
=
OK
is returned for unrecognized AT commands. Default is
Disabled
.
Incoming
Connection
Select whether Incoming Connection requests will be
Disabled
,
Automatic
(accepted automatically), or
Manual
(accepted manually). Default is
Disabled
.
Connect String
Enter the connect string. This modem initialization string prepares the modem for
communications. It is a customized string sent with the “CONNECT” modem
response code.
Display Remote IP
Selects whether the incoming RING sent on the Serial Line is followed by the IP
address of the caller. Default is
Disabled
.
