9: Terminal and Host Settings
EDS1100/2100 Device Server User Guide
69
Figure 9-5 Host Configuration
3. Enter or modify the following settings:
Table 9-6 Host Configuration
4. Click
Submit
to save changes.
5. Repeat above steps as desired, according to additional host(s) available on your product.
Host Settings
Description
Name
Enter a name for the host. This name appears on the Login Connect Menu. To
leave a host out of the menu, leave this field blank.
Protocol
Select the protocol to use to connect to the host. Choices are:
Telnet
SSH
Note:
SSH keys must be loaded or created on the SSH page for the SSH
protocol to work.
SSH Username
Appears if you selected
SSH
as the protocol. Enter a username to select a pre-
configured Username/Password/Key (configured on the SSH: Client Users
page), or leave it blank to be prompted for a username and password at
connect time.
Remote Address
Enter an IP address for the host to which the device will connect.
Remote Port
Enter the port on the host to which the device will connect.
