10: Service Settings
EDS1100/2100 Device Server User Guide
76
3. Click
Submit
.
Syslog Settings
The Syslog web page shows the current configuration and statistics of the system log. Here you
may configure the syslog destination and the severity of the events to log.
To configure the Syslog:
Note:
The syslog file is always saved to local storage, but it is not retained through
reboots. Saving the syslog file to a server that supports remote logging services (see RFC
3164) allows the administrator to save the complete syslog history. The default port is 514.
1. Select
Syslog
on the menu bar. The Syslog page opens to display the current configuration.
Figure 10-10 Syslog
2. Enter or modify the following settings:
Allow Firmware Update
Specifies whether or not the TFTP Server is allowed to accept a firmware
update for the device. An attempt to update firmware is recognized based on
the name of the file.
Note:
TFTP cannot authenticate the client, so the device is open to
malicious update.
Allow XCR Import
Specifies whether the TFTP server is allowed to accept an XML configuration
file for update. An attempt to import configuration is recognized based on the
name of the file.
Note:
TFTP cannot authenticate the client, so the device is open to
malicious update.
TFTP Settings (continued)
Description
