9: Line, Tunnel, Terminal, and Host Settings
EDS User Guide
62
Figure 9-8c. Tunnel n Packing Mode (Mode = Send Character)
2. Enter or modify the following settings:
Tunnel - Packing Mode
Page Settings
Description
Mode
Select Disable to disable Packing Mode
completely.
Select Timeout to send data after the
specified time has elapsed.
Select Send Character to send the queued
data when the send character is received.
Threshold
(Appears for both Timeout
and Send Character
Modes)
Send the queued data when the number of
queued bytes reaches the threshold.
Timeout
(Appears for Timeout
Mode)
Enter a time, in milliseconds, for the EDS to
send the queued data after the first character
is received.
Send Character
(Appears for Send
Character Mode)
Enter the send character. The EDS
immediately sends out the queued data.
Trailing Character
(Appears for Send
Character Mode)
Enter the trailing character. This character is
sent immediately following the send
character.
3. Click Submit.
Note:
Standard and Non-printable Send or Trailing characters may be specified in
either Hexadecimal (prefix with 0x) or decimal (prefix with \).
