14: Maintenance
EMG™ Edge Management Gateway User Guide
292
3. Click the
View Log
button. Your specified system log displays. For example, if you select the
type
All
and the level
Error
, the EMG unit displays a log similar to this:
Figure 14-4 View System Logs
From a queried system log (e.g.,
), you may email this information to a specific
individual or to Lantronix Technical Support. See
Emailing Logs and Reports (on page 300)
.
To clear system logs:
1. From the
Maintenance - System Logs
.
2. Click the
Clear Log
button to clear all log information.
System Log Commands
Go to
to view CLI commands which correspond to the web page entries
described above.
Ending at
Select the endpoint of the range you want to view:
End of Log:
to view the log from the latest available ending time and date.
Date:
to view the log up to the last available log ending date and time.
