16: Command Reference
EMG™ Edge Management Gateway User Guide
315
When the number of lines displayed by a command exceeds the size of the window (the
default is 25), the command output is halted until the user is ready to continue. To display the
next line, press
Enter
, and to display the page, press the space bar. You can override the
number of lines (or disable the feature altogether) with the
set cli
command.
Keyboard Shortcuts:
Control-a:
move to the start of the line
Control-e:
move to the end of the line
Control-b:
move back to the start of the current word
Control-f:
move forward to the end of the next word
Control-u:
erase from cursor to the beginning of the line
Control-k:
erase from cursor to end of the line
Administrative Commands
admin banner login
Syntax
admin banner login <Banner Text>
Description
Configures the banner displayed after the user logs in.
Note:
To go to the next line, type
\n
and press
Enter
.
admin banner logout
Syntax
admin banner logout <Banner Text>
Description
Configures the banner displayed after the user logs out.
Note:
To go to the next line, type
\n
and press
Enter
.
admin banner show
Syntax
admin banner show
Description
Displays the welcome, SSH, login, and logout banners.