17: Command Reference
EMG™ Edge Management Gateway User Guide
398
Description
Clears the commands that have been entered during the command line interface session.
show history
Syntax
show history
Description
Displays the last 100 commands entered during the session.
Connection Commands
connect bidirection
Syntax
connect bidirection <Port # or Name> <endpoint> <one or more Parameters>
Parameters
Endpoint is one of:
charcount <# of Chars>
charseq <Char Sequence>
charxfer <toendpoint|fromendpoint>
date <MMDDYYhhmm[ss]>
deviceport <Device Port # or Name>
exclusive <enable|
disable
>
ssh <IP Address or Name> [port <TCP Port>][<SSH flags>]
where
<SSH flags> is one or more of:
user <Login Name>
version <1|2>
command <Command to Execute>
tcp <IP Address> [port <TCP Port>]
telnet <IP Address or Name> [port <TCP Port>]
trigger <
now
|datetime|chars>
If the trigger is
datetime
(establish connection at a specified date/time), enter the date
parameter. If the trigger is
chars
(establish connection on receipt of a specified number or
characters or a character sequence), enter the
charxfer
parameter and either the
charcount
or the
charseq
parameter.
udp <IP Address> [port <UDP Port>]
Description
Connects a device port to another device port or an outbound network connection (data flows in
both directions).
Summary of Contents for EMG Series
Page 100: ...7 Networking EMG Edge Management Gateway User Guide 100 Figure 7 5 Network Wireless Settings...
Page 353: ...15 Maintenance EMG Edge Management Gateway User Guide 353 Figure 15 12 About EMG...
Page 474: ...EMG Edge Management Gateway User Guide 474 Figure E 3 EU Declaration of Conformity...
Page 475: ...EMG Edge Management Gateway User Guide 475 Figure E 4 EU Declaration of Conformity continued...
